2025
Hatice Kübra Bilgili, Masahiro Todoh. “Pioneering soundscapes: Investigating commercial fused deposition modelling filament’s potential for ultrasound technology in bone tissue scaffolds”, Bioengineering, 12: 529.
https://doi.org/10.3390/bioengineering12050529
Yongkun Zhao, Mingquan Zhang, Balint K. Hodossy, Jiatong Jiang, Masahiro Todoh, Dario Farina (2025). “Neuromechanical simulation of natural postural sways in human quiet stance based on an hybrid triple inverted pendulum model and state-dependent intermittent neural control”, IEEE Transactions on Biomedical Engineering 72: 1340-1353.
https://doi.org/10.1109/TBME.2024.3502169
Sandro Mihradi, Edgar Buwana Sutawika, Vani Virdyawan, Rachmat Zulkarnain Goesasi, Masahiro Todoh (2025). “Rehab-Bot: A home-based lower-extremity rehabilitation robot for muscle recovery”, Cognitive Robotics 5: 114-125.
https://doi.org/10.1016/j.cogr.2025.02.001
Dawit Bogale Alemayehu, Masahiro Todoh, Song-Jeng Huang (2025). “Hybrid biomechanical design of dental implants: integrating solid and gyroid triply periodic minimal surface lattice architectures for optimized stress distribution”, Journal of Functional Biomaterials 16: 54.
https://doi.org/10.3390/jfb16020054
Satoshi Yamada, Hayato Suzuki, Kazuki Sawada, Shimpei Okada, Akihiko Nishimura, Masahiro Todoh (2025). “Novel strut-based stochastic lattice biomimetically designed based on the structural and mechanical characteristics of cancellous bone”, Materials&Design 251: 113657.
https://doi.org/10.1016/j.matdes.2025.113657
2024
Masanari Hamasaki, Tomohiro Onodera, Junichi Furukawa, Masahiro Todoh, Yuma Sakai, Taku Ebata, Mohamad Terkawi, Kentaro Homan, Norimasa Iwasaki, “Intra-articular administration of ganglioside sugars protects cartilage from progressive degeneration in an instability OA rabbit model”, Cartilage, OnlineFirst.
https://doi.org/10.1177/19476035241311542
Dawit Bogale Alemayehu, Masahiro Todoh, Song-Jeng Huang (2024). “Nonlinear finite element analysis of bone–implant contact in three short dental implant models with varying osseointegration percentages”, Oral 4: 505-524.
https://doi.org/10.3390/oral4040040
Yongkun Zhao, Shibo Jing, Haijun Wu, Honghan Li, Masahiro Todoh (2024). “E-TRGAN: A novel transformer generative adversarial network for high-density surface electromyography signal reconstruction”, IEEE Transactions on Instrumentation & Measurement 73: 4011013.
https://doi.org/10.1109/TIM.2024.3472778
Yoshiaki Kataoka, Tomoya Ishida, Satoshi Osuka, Ryo Takeda, Shigeru Tadano, Satoshi Yamada, Harukazu Tohyama (2024). “Validity of wearable gait analysis system for measuring lower-limb kinematics during timed up and go test”, Sensors 24: 6296.
https://doi.org/10.3390/s24196296
Song-Jeng Huang, Chuan Li, Manas Sarkar, William Li, Sathiyalingam Kannaiyan, Hatice Kübra Bilgili, Duha Ali Falah Almalahi, Masahiro Todoh (2024). “Mechanical reinforcement in Magnesium-Yttrium alloys by eggshell powder using resistance casting”, Journal of Alloys and Compounds 1008: 176458.
https://doi.org/10.1016/j.jallcom.2024.176458
Yongkun Zhao, Balint Hodossy, Shibo Jing, Masahiro Todoh, Dario Farina (2024). “Delayed reinforcement learning converges to intermittent control for human quiet stance”, Medical Engineering & Physics 130: 104197.
https://doi.org/10.1016/j.medengphy.2024.104197
Aqmar Zakaria, Mohd Hamdi, Masahiro Todoh, Farazila Yusof, Keita Arai (2024). “Development and characterization of plasma electrolytic oxidation containing hydroxyapatite coating on selective laser melted Ti6Al4V porous scaffold”, Surface & Coatings Technology 488: 131059.
https://doi.org/10.1016/j.surfcoat.2024.131059
Dawit Bogale Alemayehu, Masahiro Todoh (2024). “Enhanced energy absorption with bioinspired composite triply periodic minimal surface gyroid lattices fabricated via fused filament fabrication (FFF)”, Journal of Manufacturing and Materials Processing 8: 86.
https://doi.org/10.3390/jmmp8030086
Dawit Bogale Alemayehu, Masahiro Todoh, Song-Jeng Huang (2024). “Advancing 3D dental implant finite element analysis: Incorporating biomimetic trabecular bone with varied pore sizes in Voronoi lattices”, Journal of Functional Biomaterials 15: 94.
https://doi.org/10.3390/jfb15040094
Yongkun Zhao, Mingquan Zhang, Haijun Wu, Shibo Jing, Tianyu Zhou, Masahiro Todoh (2024). “A comprehensive sensorimotor control model emulating neural activities for human arm planar reaching movements”, Applied Intelligence 54: 2508-2527.
https://doi.org/10.1007/s10489-023-04796-x
Yutong Gu, Hiromasa Oku, Masahiro Todoh (2024). “American sign language recognition and translation using Perception Neuron wearable inertial motion capture system”, Sensors 24: 453.
https://doi.org/10.3390/s24020453
2023
Dawit Bogale Alemayehu, Masahiro Todoh, Jang-Hsing Hsieh, Chuan Li, Song-Jeng Huang (2023). “Improving pure titanium’s biological and mechanical characteristics through ECAP and micro arc oxidation processes”, Micromachines 14: 1541.
https://doi.org/10.3390/mi14081541
Yongkun Zhao, Juzheng Mao, Masahiro Todoh (2023). “Development of a portable assistive exoskeleton for human arm movements”, Electronics Letters 59: e12785.
https://doi.org/10.1049/ell2.12785
Yoshiaki Kataoka, Yuki Saito, Ryo Takeda, Tomoya Ishida, Shigeru Tadano, Teppei Suzuki, Kentaro Nakamura, Akimi Nakata, Satoshi Osuka, Satoshi Yamada, Mina Samukawa, Harukazu Tohyama (2023). “Evaluation of lower-limb kinematics during timed up and go (TUG) test in subjects with locomotive syndrome (LS) using wearable gait sensors (H-Gait System)”, Sensors 23: 687.
https://doi.org/10.3390/s23020687
Yongkun Zhao, Mingquan Zhang, Haijun Wu, Xiangkun He, Masahiro Todoh (2023). “Neuromechanics-based neural feedback controller for planar arm reaching movements”, Bioengineering 10: 436.
https://doi.org/10.3390/bioengineering10040436
Yongkun Zhao, Haijun Wu, Mingquan Zhang, Juzheng Mao, Masahiro Todoh (2023). “Design methodology of portable upper limb exoskeletons for people with strokes”, Frontiers in Neuroscience 17: 1128332.
https://doi.org/10.3389/fnins.2023.1128332
2022
Yutong Gu, Sherrine, Weiyi Wei, Xinya Li, Jianan Yuan, Masahiro Todoh (2022). “American sign language alphabet recognition using inertial motion capture system with deep learning”, Inventions 7: 112.
https://doi.org/10.3390/inventions7040112
Yongkun Zhao, Shihang Ding, Masahiro Todoh (2022). “Validate the force-velocity relation of the Hill muscle model from a molecular perspective”, Frontiers in Bioengineering and Biotechnology 10: 1006571.
https://doi.org/10.3389/fbioe.2022.1006571
Yuma Sakai, Masahiro Todoh (2022). “Assessing the friction properties of synovial joint lubrication by tracking pendulum motion”, Journal of Biomechanical Science and Engineering 17: 22-00199.
https://doi.org/10.1299/jbse.22-00199
Yutong Gu, Chao Zheng, Masahiro Todoh, Fusheng Zha (2022). “American sign language translation using wearable inertial and electromyography sensors for tracking hand movements and facial expressions”, Frontiers in Neuroscience 16: 962141.
https://doi.org/10.3389/fnins.2022.962141
Satoshi Yamada, Koichi Fukasawa, Yuki Suzuki, Yuta Takahashi, Masahiro Todoh, Shigeru Tadano (2022). “The role of geometrical features of the microarchitecture in the cancellous stiffness of the bovine femoral bone”, Medical Engineering & Physics 105: 103823.
https://doi.org/10.1016/j.medengphy.2022.103823
Yuki Saito, Tomoya Ishida, Yoshiaki Kataoka, Ryo Takeda, Shigeru Tadano, Teppei Suzuki, Kentaro Nakamura, Akimi Nakata, Satoshi Osuka, Satoshi Yamada, Mina Samukawa, Harukazu Tohyama (2022). “Evaluation of gait characteristics in subjects with locomotive syndrome using wearable gait sensors”, BMC Musculoskeletal Disorders 23: 457.
https://doi.org/10.1186/s12891-022-05411-9
Masahiko Takahata, Tomohiro Shimizu, Satoshi Yamada, Tomomaya Yamamoto, Tomoka Hasegawa, Ryo Fujita, Hideyuki Kobayashi, Tsutomu Endo, Yoshinao Koike, Norio Amizuka, Masahiro Todoh, Jun-ichiro Okumura, Tomomichi Kajino, Norimasa Iwasaki (2022). “Bone biopsy findings in patients receiving long-term bisphosphonate therapy for glucocorticoid-induced osteoporosis”, Journal of Bone and Mineral Metabolism 40: 613–622.
https://doi.org/10.1007/s00774-022-01323-9
Bowen Zhu, Kenji Yokozeki, Md. Arafat Kabir, Masahiro Todoh, Toshiyuki Akazawa, Masaru Murata (2022). “Chemical properties of human dentin blocks and vertical augmentation by ultrasonically demineralized dentin matrix blocks on scratched skull without periosteum of adult-aged rats”, Materials 15: 105.
https://doi.org/10.3390/ma15010105
2021
Md. Arafat Kabir, Akihiro Hirakawa, Bowen Zhu, Kenji Yokozeki, Mamata Shakya, Bingzhen Huang, Toshiyuki Akazawa, Masahiro Todoh, Masaru Murata (2021). “Mechanical properties of human concentrated growth factor (CGF) membrane and the CGF graft with bone morphogenetic protein-2 (BMP-2) onto periosteum of the skull of nude mice”, International Journal of Molecular Sciences 222: 11331.
https://doi.org/10.3390/ijms222111331
2020
Aqmar Zakaria, Hamdi Shukor, Masahiro Todoh, Kamaruzaman Jusoff (2020). “Bio-functional coating on Ti6Al4V surface produced by using plasma electrolytic oxidation”, Metals 10: 1124.
https://doi.org/10.3390/met10091124
Lei Zhao, Xingming He, Masahiro Todoh (2020). “Mechanical behavior of biomimetically mineralized collagen matrix using the polymer – induced liquid precursor process”, Journal of Biomechanics 104: 109738.
https://doi.org/10.1016/j.jbiomech.2020.109738
2019
Kaori Endo, Masahiko Takahata, Hiroyuki Sugimori, Satoshi Yamada, Shigeru Tadano, Jeffrey Wang, Masahiro Todoh, Yoichi M. Ito, Daisuke Takahashi, Kohsuke Kudo, Norimasa Iwasaki (2019). “Magnetic resonance imaging T1 and T2 mapping provide complementary information on the bone mineral density regarding cancellous bone strength in the femoral head of postmenopausal women with osteoarthritis”, Clinical Biomechanics 65: 13-18.
https://doi.org/10.1016/j.clinbiomech.2019.03.010
2018
Takeru Tsujimoto, Hideki Sudo, Masahiro Todoh, Katsuhisa Yamada, Koji Iwasaki, Takashi Ohnishi, Naoki Hirohama, Takayuki Nonoyama, Daisuke Ukeba, Katsuro Ura, Yoichi M. Ito, Norimasa Iwasaki (2018). “An acellular bioresorbable ultra-purified alginate gel promotes intervertebral disc repair: A preclinical proof-of-concept study”, EBioMedicine 37: 521-534.
https://doi.org/10.1016/j.ebiom.2018.10.055
Shigeru Tadano, Yuuki Tonsho, Saran Keeratihattayakorn, Satoshi Yamada, Yasuhiro Nakajima, Masahide Harada, Norimasa Iwasaki (2018). “Cooperative activities of forearm muscles under loading applied to thumb or each finger”, Journal of Biomechanical Science and Engineering 13: 18-00065.
https://doi.org/10.1299/jbse.18-00065
Satoshi Yamada, Mai Onuma, Masahiro Todoh, Shigeru Tadano (2018). “Changes of residual stress, diaphyseal size, and micro-nano structure in bovine femurs during growth and maturation”, Journal of Biomechanical Science and Engineering 13: 18-00110.
https://doi.org/10.1299/jbse.18-00110
2017
鈴木逸人, 山田悟史, 後藤東照, 但野茂 (2007). “Micro-MREによるゼラチンゲルとブタ肝臓の動的粘弾性計測”, 日本機械学会論文集 83: 16-00415.
https://doi.org/10.1299/transjsme.16-00415
Tomohiro Shimizu, Masahiko Takahata, Hiromi Kimura-Suda, Yusuke Kameda, Kaori Endo, Hiroki Hamano, Masahiro Ota, Shigeto Hiratsuka, Dai Sato, Teppei Ito, Masahiro Todoh, Shigeru Tadano, Norimasa Iwasaki (2017). “Autoimmune arthritis deteriorates bone quantity and quality of periarticular bone in a mouse model of rheumatoid arthritis”, Osteoporosis International 28: 709-718.
https://doi.org/10.1007/s00198-016-3781-6
2016
Satoshi Yamada, Shigeru Tadano, Koichi Fukasawa (2016). “Micro-cantilever bending for elastic modulus measurements of a single trabecula in cancellous bone”, Journal of Biomechanics 49: 4124-4127.
https://doi.org/10.1016/j.jbiomech.2016.10.016
Shigeru Tadano, Satoshi Yamada (2016). “How is residual stress/strain detected in bone tissue?”, Mechanical Engineering Reviews 3: 15-00291.
https://doi.org/10.1299/mer.15-00291
Kaori Endo, Satoshi Yamada, Masahiro Todoh, Masahiko Takahata, Norimasa Iwasaki, Shigeru Tadano (2016). “Structural strength of cancellous specimens from bovine femur under cyclic compression”, PeerJ 4: e1562.
https://doi.org/10.7717/peerj.1562
2015
Rikiya Baba, Tomohiro Onodera, Daisuke Momma, Masatake Matsuoka, Kazutoshi Hontani, Sameh Elmorsy, Kaori Endo, Masahiro Todoh, Shigeru Tadano, Norimasa Iwasaki (2015). “A novel bone marrow stimulation technique augmented by administration of ultrapurified alginate gel enhances osteochondral repair in a rabbit model”, Tissue Engineering Part C 21: 1263-1273.
https://doi.org/10.1089/ten.tec.2015.0128
Yukinori Tsukuda, Tomohiro Onodera, Masayuki Ito, Yasuharu Izumisawa, Yasuhiko Kasahara, Tatsuya Igarashi, Nobuo Ohzawa, Masahiro Todoh, Shigeru Tadano, Norimasa Iwasaki (2015). “Therapeutic effects of intra-articular ultra-purified low endotoxin alginate administration on an experimental canine osteoarthritis model”, Journal of Biomedical Materials Research Part A 103: 3441-3448.
https://doi.org/10.1002/jbm.a.35490
Saran Keeratihattayakorn, Satoshi Yamada, Shigeru Tadano (2015). “Muscle stress generated in the forearm during hand gripping”, Journal of Biomechanical Science and Engineering 10: 15-00423.
https://doi.org/10.1299/jbse.15-00423
Hayato Suzuki, Shigeru Tadano, Mototeru Goto, Satoshi Yamada, Kazuhiro Fujisaki, Itsuro Kajiwara, Mikio Suga, Gen Nakamura (2015). “Viscoelastic modulus of agarose gels by magnetic resonance elastography using Micro-MRI”, Mechanical Engineering Journal 2: 14-00417.
https://doi.org/10.1299/mej.14-00417
2014
Tomohiro Shimizu, Masahiko Takahata, Yusuke Kameda, Hiroki Hamano, Teppei Ito, Hiromi Kimura-Suda, Masahiro Todoh, Shigeru Tadano, Norimasa Iwasaki (2014). “Vitamin K-dependent carboxylation of osteocalcin affects the efficacy of teriparatide (PTH1-34) for skeletal repair”. Bone 64: 95-101.
https://doi.org/10.1016/j.bone.2014.04.005
Sameh Elmorsy, Tadanao Funakoshi, Fumio Sasazawa, Masahiro Todoh M, Shigeru Tadano, Norimasa Iwasaki (2014). “Chondroprotective effects of high- molecular-weight cross-linked hyaluronic acid in a rabbit knee osteoarthritis model”. Osteoarthritis and Cartilage 22: 121-127.
https://doi.org/10.1016/j.joca.2013.10.005
Satoshi Yamada, Shigeru Tadano, Sakurako Fukuda (2014). “Nanostructure and elastic modulus of single trabecula in bovine cancellous bone”, Journal of Biomechanics 47: 3482-3487.
https://doi.org/10.1016/j.jbiomech.2014.09.009
Satoshi Yamada, Masaru Kanaoka, Shigeru Tadano (2014). “Effect of glass content in bioceramics on the laser bonding strength with bone specimen”, Journal of Biomechanical Science and Engineering 9: 14-00433.
https://doi.org/10.1299/jbse.14-00433
2012
Kazuhiro Fujisaki, Masahiro Todoh, Atsushi Niida, Ryota Shibuya, Shunsuke Kitami, Shigeru Tadano (2012). “Orientation and deformation of mineral crystals in tooth surfaces”, Journal of the Mechanical Behavior of Biomedical Materials 10: 176-182.
https://doi.org/10.1016/j.jmbbm.2012.02.025
Tatsuya Igarashi, Norimasa Iwasaki, Daisuke Kawamura, Yukinori Tsukuda, Yasuhiko Kasahara, Masahiro Todoh, Shigeru Tadano, Akio Minami (2012). “Therapeutic effects of intra-articular ultrapurified low endotoxin alginate administration on experimental osteoarthritis in rabbits”, Cartilage 3: 70-78.
https://doi.org/10.1177/1947603511418959
Taira Ogita, Masaru Kanaoka, Masahiro Todoh, Shigeru Tadano (2012). “In vitro laser bonding of bovine cortical bone specimen and TCP-glass ceramics”, Journal of Biomechanical Science and Engineering 7: 248-258.
https://doi.org/10.1299/jbse.7.248
2011
Satoshi Yamada, Shigeru Tadano, Kazuhiro Fujisaki (2011). “Residual stress distribution in rabbit limb bones”, Journal of Biomechanics 44: 1285-1290.
https://doi.org/10.1016/j.jbiomech.2011.01.038
Satoshi Yamada, Shigeru Tadano, Masahiro Todoh, Kazuhiro Fujisaki (2011). “Residual stress distribution in the bovine femoral diaphysis measured by synchrotron”, Journal of Biomechanical Science and Engineering 6: 114-124.
https://doi.org/10.1299/jbse.6.114
荻田平, 但野茂, 東藤正浩, 金岡優 (2011). “ハイドロキシアパタイト焼結体のレーザ接合性”, 日本機械学会論文集C編 77: 537-544.
https://doi.org/10.1299/kikaic.77.537
2010
Satoshi Yamada, Shigeru Tadano (2010). “Residual stress around the cortical surface in bovine femoral diaphysis”, Journal of Biomechanical Engineering 132: 044503.
https://doi.org/10.1115/1.4001163
2009
Ryo Takeda, Shigeru Tadano, Masahiro Todoh, Manabu Morikawa, Minoru Nakayasu, Satoshi Yoshinari (2009). “Gait analysis using gravitational acceleration measured by wearable sensors”, Journal of Biomechanics 42: 223-233.
https://doi.org/10.1016/j.jbiomech.2008.10.027
Ryo Takeda, Shigeru Tadano, Akiko Natorigawa, Masahiro Todoh, Satoshi Yoshinari (2009). “Gait posture estimation using wearable acceleration and gyro sensors”, Journal of Biomechanics 42: 2486-2494.
https://doi.org/10.1016/j.jbiomech.2009.07.016
Masahiro Todoh, Shigeru Tadano, Bijay Giri, Masahiro Nishimoto (2009). “Effect of gradual demineralization on the mineral fraction and mechanical properties of cortical bone”, Journal of Biomechanical Science and Engineering 4: 230-238.
https://doi.org/10.1299/jbse.4.230
藤崎和弘, 但野茂, 東藤正浩 (2009). “脊髄組織の圧縮粘弾性変形と流動電位の関係”, 日本臨床バイオメカニクス学会誌 30: 173-178.
2008
Shigeru Tadano, Bijay Giri, Takuya Sato, Kazuhiro Fujisaki, Masahiro Todoh (2008). “Estimating nanoscale deformation in bone by X-ray diffraction imaging method, Journal of Biomechanics 41: 945-952.
https://doi.org/10.1016/j.jbiomech.2008.01.005
Bijay Giri, Shigeru Tadano, Kazuhiro Fujisaki, Masahiro Todoh (2008). “Understanding site-specific residual strain and architecture in bovine cortical bone”, Journal of Biomechanics 41: 3107-3115.
https://doi.org/10.1016/j.jbiomech.2008.09.012
山田悟史, 但野茂, 東藤正浩 (2008). “X線回折sin2ψ法による牛大腿骨骨幹部の残留応力測定”, 日本機械学会論文集A編 74: 894-900.
https://doi.org/10.1299/kikaia.74.894
2007
Bijay Giri, Shigeru Tadano, Kazuhiro Fujisaki, Masahiro Todoh (2007). “Microstructure of bone around natural hole in bovine lumbar vertebra”, Journal of Biomechanical Science and Engineering 2: 1-11.
https://doi.org/10.1299/jbse.2.1
2006
Hiroki Nakatsuchi, Shigeru Tadano, Masahiro Todoh, Yukio Nakatsuchi, Shinichiro Mori, Masahiro Endo (2006). “Finite element modeling of the cortical bone region using clinical CT images”, Journal of Biomechanical Science and Engineering 1: 316-326.
https://doi.org/10.1299/jbse.1.316
2004
Masahiro Todoh, Masami Ihara, Takeshi Matsumoto, Masao Tanaka (2004). “Relationship between mechanical property of cancellous bone and hardness of trabeculae”, JSME International Journal 47C: 1075-1078.
https://doi.org/10.1299/jsmec.47.1075
2000
Masahiro Todoh, Shigeru Tadano, Jun-ichi Shibano, Takayoshi Ukai (2000). “Polychromatic X-ray measurements of anisotropic residual stress in bovine femoral bone”, JSME International Journal 43C: 795-801.
https://doi.org/10.1299/jsmec.43.795
1999
柴野純一, 但野茂, 東藤正浩, 鵜飼隆好 (1999). “HApコーティングインプラントの残留応力に及ぼす中間層の効果”, 日本機械学会論文集A編 65: 2246-2251.
https://doi.org/10.1299/kikaia.65.2246
東藤正浩, 但野茂, 柴野純一, 鵜飼隆好 (1999). “牛大腿骨内異方性残留応力の白色X線測定”, 日本機械学会論文集A編 65: 406-413.
https://doi.org/10.1299/kikaia.65.406
1997
柴野純一, 但野茂, 東藤正浩, 加藤収一, 鵜飼隆好 (1997). “ハイドロキシアパタイト焼結時に生じる残留応力”, 日本機械学会論文集C編 63: 785-790.
https://doi.org/10.1299/kikaic.63.785
Shigeru Tadano, Masahiro Todoh, Jun-ichi Shibano, Takayoshi Ukai (1997). “Residual stress evaluation of hydroxyapatite coating Ti implant”, JSME International Journal 40A: 328-335.
https://doi.org/10.1299/jsmea.40.328
但野茂, 東藤正浩, 柴野純一, 鵜飼隆好 (1997). “ハイドロキシアパタイトをコーティングしたチタンインプラントの残留応力評価”, 日本機械学会論文集A編 63: 542-549.
https://doi.org/10.1299/kikaia.63.542
1995
柴野純一, 鵜飼隆好, 但野茂, 東藤正浩, (1995). “白色X線法による表面仕上げされたオーステナイト系ステンレス鋼の残留応力評価”, 日本機械学会論文集A編 61: 2469-2475.
https://doi.org/10.1299/kikaia.61.2469
柴野純一, 鵜飼隆好, 但野茂, 東藤正浩, (1995). “白色X線法によるセラミックコーティング界面近傍の残留応力評価”, 日本機械学会論文集A編 61: 1356-1362.
https://doi.org/10.1299/kikaia.61.1356
